Plasma cutting power sources and welding machines

itaeng

Inverter MIG/MAG

MIG 176 ADJ SYNERGIC

single-phase
S00216

MIG 176 ADJ SYNERGIC

detail

MULTIWELD 186 SYNERGIC

single-phase
S00224

MULTIWELD 186 SYNERGIC

detail

MULTIWELD 236 SYNERGIC

single-phase
S00228

MULTIWELD 236 SYNERGIC

detail

MIG 215 AL SYNERGIC PULSED

single-phase
S00292

MIG 215 AL SYNERGIC PULSED

detail

HI-MIG 2000 SYNERGIC

single-phase
S00283

HI-MIG 2000 SYNERGIC

detail

HI-MIG 3000 SYNERGIC

three-phase
S00284

HI-MIG 3000 SYNERGIC

detail

HI-MIG 4000 SYNERGIC

three-phase
S00285

HI-MIG 4000 SYNERGIC

detail

INVERTER PRO MIG 466 PULSED

three-phase
S00313

INVERTER PRO MIG 466 PULSED

detail

INVERTER PRO MIG 566 PULSED

three-phase
S00315

INVERTER PRO MIG 566 PULSED

detail
If you do not find the machine you are looking for, please send an e-mail to sales@elettrocf.com
Metal inert gas (MIG) welding or metal active gas (MAG) welding, known according to the AWS terminology as Gas metal arc welding (GMAW), is a welding process in which an electric arc is formed between a consumable wire electrode and the workpiece metal, which heats the workpiece metal, causing them to melt, and join. Along with the wire electrode, a shielding gas is fed through the welding torch, which shields the process from contaminants in the air. The fact that it’s a continuous wire welding process grants a high productivity and, at the same time, the presence of gas allows operation without slag (both these features make this procedure more advantageous in comparison with MMA welding).
Today, GMAW is the most common industrial welding process, preferred for its versatility, speed and the relative ease of adapting the process to robotic automation. Unlike welding processes that do not employ a shielding gas, such as shielded metal arc welding, it is rarely used outdoors or in other areas of air volatility. Some welding machines include the use of a related process, flux cored arc welding, that often does not utilize a shielding gas, instead employing a hollow electrode wire that is filled with flux on the inside.
To perform gas metal arc welding, the basic necessary equipment is:
1. Welding power source.
2. Welding gun with a dual function: to start the electric arc between the wire and the workpiece and to fed the shielding gas.
3. Wire feed unit.
4. Welding wire.
5. Ground clamp.
6. Shielding gas supply.